V8's Built By Dave Gilliver
Posted: Sat Nov 14, 2020 10:48 pm
As everyone knows I always sing praises for Mr Dave Gillivers engine building skills and knowledge, I am often with him and talking to him as I have always had a very strong interest in engines, cars and mechanical anything for that matter.
Whilst taking up too much of Dave's time I asked him to delve into the Archives and show me more stuff from yester-year
..One has just come fresh from the Dyno..It's a Small Block Ford that Dave machined and fitted a stroker kit into, the Dyno figures were 460bhp and 425Ft/Lb of Torque, here is a couple of pics if that one looking stunning
>>>
>>>
===
Here's some others that passed through the Mill and onto the machining equipment & through Dave's magical little pinkies,
>>>
More to follow Folks
Whilst taking up too much of Dave's time I asked him to delve into the Archives and show me more stuff from yester-year
..One has just come fresh from the Dyno..It's a Small Block Ford that Dave machined and fitted a stroker kit into, the Dyno figures were 460bhp and 425Ft/Lb of Torque, here is a couple of pics if that one looking stunning >>>>>>
- HPIM1109.JPG (135.03 KiB) Viewed 1427 times
- HPIM1108.JPG (111.45 KiB) Viewed 1427 times
Here's some others that passed through the Mill and onto the machining equipment & through Dave's magical little pinkies,
- HPIM0966.JPG (112.26 KiB) Viewed 1427 times
- HPIM0967.JPG (126.86 KiB) Viewed 1427 times
- HPIM0968.JPG (103.81 KiB) Viewed 1427 times
- HPIM0970.JPG (111.27 KiB) Viewed 1427 times
- HPIM0989.JPG (123.48 KiB) Viewed 1427 times
- HPIM0954.JPG (110.13 KiB) Viewed 1427 times
- HPIM0955.JPG (109.23 KiB) Viewed 1427 times
More to follow Folks
