Hey colcolin7673 wrote:Joerg wrote:Hi Colin
I wonder if your solid water pipes routed to the matrix might have caused the problem.
If the engine moves under power in the engine mounts the pipes might apply some torque to the inlet and outlet pipe of the matix?
Just guessing.
Joerg
Hi Joerg.
Thanks,
We have rubber pipes at the back of the engine to the matix so it should have taken up any flex.
You will need to keep a check on the bottom solid pipe running above the exhaust manifold. Heat exchanger springs to mind.
Not sure what temperature the rubber hose will stand when it is attached at the end.
Dare I say unwanted heat!