Interceptor Door Handles
- Clive Bishop
- Posts: 934
- Joined: Wed Apr 18, 2007 8:49 am
- Location: North Somerset
- Contact:
Interceptor Door Handles
Just a question, my son has been making at his work parts for some alfas and other historic racing cars - steering, suspension parts but also stainless steel door parts including door handles.
I know that the Interceptor door handles are not easily chromed or replaced, but assuming he can 3D scan a outside facing door handle assembly and then produce it from a single billet, is there any interest in them?
Robey's etc have them as NLA and so just a question and we don't know if it is possible yet, but no point looking into it if no interest.
I know that the Interceptor door handles are not easily chromed or replaced, but assuming he can 3D scan a outside facing door handle assembly and then produce it from a single billet, is there any interest in them?
Robey's etc have them as NLA and so just a question and we don't know if it is possible yet, but no point looking into it if no interest.
1973 Interceptor Mk III 136/8332 - Moss Green
1973 Jensen Healey Mk 1 11362 - Magenta - Owned by Lindsey
1972 Jensen Healey Mk 1 10343 - Sadly too far gone and so now a donor car
1973 Jensen Healey Mk 1 12504 - Sold for potential restoration / racer
1973 Jensen Healey Mk 1 11362 - Magenta - Owned by Lindsey
1972 Jensen Healey Mk 1 10343 - Sadly too far gone and so now a donor car
1973 Jensen Healey Mk 1 12504 - Sold for potential restoration / racer
- Martin R
- Posts: 5951
- Joined: Sun Jul 16, 2006 11:04 pm
- Location: Chipping Norton, & Sydney Australia
Re: Interceptor Door Handles
I would consider a set for my FF if priced reasonably.
I wish I'd bought them when they were available but only bought one set for my MK3...
I wish I'd bought them when they were available but only bought one set for my MK3...
FF MK1 119/100
Interceptor MK3 136/8514
JOC Member 8905
Interceptor MK3 136/8514
JOC Member 8905
Re: Interceptor Door Handles
Likewise, I would like a couple of sets if to a good standard.
Re: Interceptor Door Handles
Me too for 2 or 3 sets Clive
Manual Int&Rag-Top
"Monkey Man"sig Registrar
"Monkey Man"sig Registrar
- Clive Bishop
- Posts: 934
- Joined: Wed Apr 18, 2007 8:49 am
- Location: North Somerset
- Contact:
Re: Interceptor Door Handles
OK well there is possibly interest, but first step is to find a set that are not marked and as good as possible to scan into the system befoe looking at brass which is then chromed or stainless steel.
Anyone volunteering a set, as mine are on the car and currently have no intention of taking them off
Just to be clear this will be the outer surround and pull handle only for both sides.
Once the scans are done he will have a better idea of feasibility to a high standard... scanning a set that have clearly defined lines on the face of them is the biggest challenge...
I'll keep you posted.
Clive
Anyone volunteering a set, as mine are on the car and currently have no intention of taking them off
Just to be clear this will be the outer surround and pull handle only for both sides.
Once the scans are done he will have a better idea of feasibility to a high standard... scanning a set that have clearly defined lines on the face of them is the biggest challenge...
I'll keep you posted.
Clive
1973 Interceptor Mk III 136/8332 - Moss Green
1973 Jensen Healey Mk 1 11362 - Magenta - Owned by Lindsey
1972 Jensen Healey Mk 1 10343 - Sadly too far gone and so now a donor car
1973 Jensen Healey Mk 1 12504 - Sold for potential restoration / racer
1973 Jensen Healey Mk 1 11362 - Magenta - Owned by Lindsey
1972 Jensen Healey Mk 1 10343 - Sadly too far gone and so now a donor car
1973 Jensen Healey Mk 1 12504 - Sold for potential restoration / racer
-
- Posts: 544
- Joined: Fri Jan 23, 2015 5:00 pm
- Location: Herts
Re: Interceptor Door Handles
Hi Clive
I may also be interested in a set of Interceptor 111 door handles - subject to reasonable price
Regards
Jim Smith
JOC Mem No 1639
136/8791 RJF 17 Owned since September 1978
I may also be interested in a set of Interceptor 111 door handles - subject to reasonable price
Regards
Jim Smith
JOC Mem No 1639
136/8791 RJF 17 Owned since September 1978
Re: Interceptor Door Handles
Clive, the problem with Stainless if they're being cast is that they shrink from molten to solid, therefore the molds have to be made bigger to allow for shrinkage, I only know this as I have spoken to the guy that made the last batches maybe 15years ago that were cast from stainless .
I do have a brass set from a Vignale car if you or your son want's to talk to me about it then you can email me on grant@grantsvanillacustard.com and I can give you/son my phone number on the email correspondence too.. Kindness always..Grant
I do have a brass set from a Vignale car if you or your son want's to talk to me about it then you can email me on grant@grantsvanillacustard.com and I can give you/son my phone number on the email correspondence too.. Kindness always..Grant
Manual Int&Rag-Top
"Monkey Man"sig Registrar
"Monkey Man"sig Registrar
- Clive Bishop
- Posts: 934
- Joined: Wed Apr 18, 2007 8:49 am
- Location: North Somerset
- Contact:
Re: Interceptor Door Handles
Hi Grant,
No they wont be cast, but looking at stainless steel or aluminium billet that can then be chromed in the case of aluminium.. as they make parts for aerospace then tolerances are very very fine and hence why they now make engineering parts and milled items for a few companies for their historic cars they look after ..... this was just a conversation between him and I and initial feedback from his team.
Have a original set being dropped off at my home for him to look at and scan and see about the programming and then feasibility and costing. If its all good then it will be a limited test run and then if more is needed then the company will then take it in house and see about ROI on a production line basis, but on demand.
Clive
No they wont be cast, but looking at stainless steel or aluminium billet that can then be chromed in the case of aluminium.. as they make parts for aerospace then tolerances are very very fine and hence why they now make engineering parts and milled items for a few companies for their historic cars they look after ..... this was just a conversation between him and I and initial feedback from his team.
Have a original set being dropped off at my home for him to look at and scan and see about the programming and then feasibility and costing. If its all good then it will be a limited test run and then if more is needed then the company will then take it in house and see about ROI on a production line basis, but on demand.
Clive
1973 Interceptor Mk III 136/8332 - Moss Green
1973 Jensen Healey Mk 1 11362 - Magenta - Owned by Lindsey
1972 Jensen Healey Mk 1 10343 - Sadly too far gone and so now a donor car
1973 Jensen Healey Mk 1 12504 - Sold for potential restoration / racer
1973 Jensen Healey Mk 1 11362 - Magenta - Owned by Lindsey
1972 Jensen Healey Mk 1 10343 - Sadly too far gone and so now a donor car
1973 Jensen Healey Mk 1 12504 - Sold for potential restoration / racer
Re: Interceptor Door Handles
I would also be interested in MKIII door handles as well, thank you
Peter Courtney
128/4859
128/4859
- Clive Bishop
- Posts: 934
- Joined: Wed Apr 18, 2007 8:49 am
- Location: North Somerset
- Contact:
Re: Interceptor Door Handles
Just as a update, the door handle units thanks to Charlie Ware, are being scanned.
There has been a delay as Airbus suddenly decided they wanted 1000 custom parts so everything had to be dropped for them!
I will come back and post here when then the outcome is ready and options for the next steps.
There has been a delay as Airbus suddenly decided they wanted 1000 custom parts so everything had to be dropped for them!
I will come back and post here when then the outcome is ready and options for the next steps.
1973 Interceptor Mk III 136/8332 - Moss Green
1973 Jensen Healey Mk 1 11362 - Magenta - Owned by Lindsey
1972 Jensen Healey Mk 1 10343 - Sadly too far gone and so now a donor car
1973 Jensen Healey Mk 1 12504 - Sold for potential restoration / racer
1973 Jensen Healey Mk 1 11362 - Magenta - Owned by Lindsey
1972 Jensen Healey Mk 1 10343 - Sadly too far gone and so now a donor car
1973 Jensen Healey Mk 1 12504 - Sold for potential restoration / racer
Re: Interceptor Door Handles
Nice one Cyril..Sorry I mean Clive & Son & Charles of CourseClive Bishop wrote: ↑Mon Oct 09, 2023 3:28 pm Just as a update, the door handle units thanks to Charlie Ware, are being scanned.
I will come back and post here when then the outcome is ready and options for the next steps.
Manual Int&Rag-Top
"Monkey Man"sig Registrar
"Monkey Man"sig Registrar