MK1 Door glass

Post Reply
BritArms
Posts: 432
Joined: Sat May 05, 2007 4:45 am

MK1 Door glass

Post by BritArms »

Still looking for front door glass both sides. Do not need quarter windows, But door glass must be clear with no scratches...
berkeleygerrell
Posts: 3
Joined: Sat Aug 01, 2020 5:24 am

Re: MK1 Door glass

Post by berkeleygerrell »

Hi there , I have a window from a 1974 can't remember which side, will try and grab a photo for you later on , located in Bournemouth
BritArms
Posts: 432
Joined: Sat May 05, 2007 4:45 am

Re: MK1 Door glass

Post by BritArms »

Thank you. But needs to be for a MK1..MK1 glass is clear....74 MK3 Would be tinted
berkeleygerrell
Posts: 3
Joined: Sat Aug 01, 2020 5:24 am

Re: MK1 Door glass

Post by berkeleygerrell »

I also have this , and by the looks of it none of my glass is tinted
Attachments
IMG_20200801_184551.jpg
IMG_20200801_184551.jpg (168.2 KiB) Viewed 1113 times
Mark1Stu
Posts: 1672
Joined: Sat Jan 14, 2006 1:30 pm

Re: MK1 Door glass

Post by Mark1Stu »

If it's important to you, glass has different markings/logo etched into it over the years. Might be worth taking a picture of what you want/have.

Regards

Stuart
Van833
Posts: 161
Joined: Sun Sep 02, 2012 12:56 pm
Location: Nottingham

Re: MK1 Door glass

Post by Van833 »

How much do you want for the untinted glass?
berkeleygerrell
Posts: 3
Joined: Sat Aug 01, 2020 5:24 am

Re: MK1 Door glass

Post by berkeleygerrell »

Hi guys I'm still not sure if it's tinted or not , haven't been back to the unit. When I go back I will take some paper with me and take a photo through the paper , unless anyone can let me know any markings?
Van833
Posts: 161
Joined: Sun Sep 02, 2012 12:56 pm
Location: Nottingham

Re: MK1 Door glass

Post by Van833 »

berkeleygerrell wrote:Hi guys I'm still not sure if it's tinted or not , haven't been back to the unit. When I go back I will take some paper with me and take a photo through the paper , unless anyone can let me know any markings?
Please let me know when you have had a look
Thanks
Post Reply

Return to “Parts Wanted”