"Setting about an Interceptor" - G Series repairs.
- Kevin Birch
- Posts: 1576
- Joined: Thu May 22, 2014 10:07 pm
- Location: UK
Re: "Setting about an Interceptor" - G Series repairs.
Can't be much rust left to cut out now, I dread the time when I start to strip mine down, I'm sure I'll find some real nasties too. Good to see you plodding along and getting it right, It'll be a superb car when done and testament to all your hard work and commitment Tim.
Keep it up.
Keep it up.
My Toys: Lotus Cortina MK2.RangeRover P38, Yam inflatable, Saab 9-3 Convertible.
Mk1 Interceptor, 115/3067
Mk1 Interceptor, 115/3067
Re: "Setting about an Interceptor" - G Series repairs.
Thanks Grant and Kev,
I try and amuse myself during the process by doing things like comparing the curves of front and rear screens...
It’s a crazy but wonderful pastime this old car lark!!
I try and amuse myself during the process by doing things like comparing the curves of front and rear screens...
It’s a crazy but wonderful pastime this old car lark!!
- Attachments
-
- 440F74E2-0AA2-4AF8-96C3-A1FD1CCD1768.jpeg (170.54 KiB) Viewed 9450 times
-
- EC755988-2059-4895-9258-3483E1BD137D.jpeg (152.33 KiB) Viewed 9450 times
Tim
1972 Interceptor III
1972 Interceptor III
Re: "Setting about an Interceptor" - G Series repairs.
Windscreen area repaired and new skirting panels fitted inside rear valance.
That’s just about all areas covered now regarding the metalwork needing attention.
That’s just about all areas covered now regarding the metalwork needing attention.
- Attachments
-
- 49EAD6F4-2CB8-4A4F-900A-70750997E321.jpeg (162 KiB) Viewed 9409 times
-
- 1427656D-9D1F-493A-8BE8-95F960060A3E.jpeg (113 KiB) Viewed 9409 times
-
- 6D2F0357-241A-4FE1-AE09-43055711391A.jpeg (179.4 KiB) Viewed 9409 times
-
- 6658A831-DB1C-488C-AFEB-11DE15DDC5A8.jpeg (146.84 KiB) Viewed 9409 times
-
- 0BFF2F21-2814-4247-87B2-8010698FAB8C.jpeg (206.78 KiB) Viewed 9409 times
Tim
1972 Interceptor III
1972 Interceptor III
Re: "Setting about an Interceptor" - G Series repairs.
I bet you had a bit of grief welding around that windscreen area Tim did you not?.. it's a very lead'y area that is isn't it
Manual Int&Rag-Top
"Monkey Man"sig Registrar
"Monkey Man"sig Registrar
Re: "Setting about an Interceptor" - G Series repairs.
The windscreen area wasn’t that lead’y Grant where as other areas on the car had an abundance of it.
I guess as they were all put together in jigs relying on hand and eye no body was like the next one so lead’y areas can differ.
I only wish that I had the skills to weld,my role is to get things ready and plan for the body shop to do what they do best.
Thanks for your interest,next is some basic preparation toward the paintwork,then the ole beauty comes home and I have a “dabble with my spanner’s”.She will go back for a lick of paint when they have a slot.
I guess as they were all put together in jigs relying on hand and eye no body was like the next one so lead’y areas can differ.
I only wish that I had the skills to weld,my role is to get things ready and plan for the body shop to do what they do best.
Thanks for your interest,next is some basic preparation toward the paintwork,then the ole beauty comes home and I have a “dabble with my spanner’s”.She will go back for a lick of paint when they have a slot.
Tim
1972 Interceptor III
1972 Interceptor III
Re: "Setting about an Interceptor" - G Series repairs.
Welding always takes so much practice.. I know the very best welders are always older people Tim with years of experience
I also know when "Keith" reads this he is going to be cringing with us using the word "Lead'y"... I know you are reading this Keith which is making you and then &
I also know when "Keith" reads this he is going to be cringing with us using the word "Lead'y"... I know you are reading this Keith which is making you and then &
Manual Int&Rag-Top
"Monkey Man"sig Registrar
"Monkey Man"sig Registrar
Re: "Setting about an Interceptor" - G Series repairs.
Some more de-rusting done then seal up for now with primer.
Get the car home and get some better pics done.
Get the car home and get some better pics done.
- Attachments
-
- 976C79F9-2EFB-4546-A19E-D7BA8CDEBA1D.jpeg (130.33 KiB) Viewed 9311 times
-
- 518E680C-74D4-4C43-9648-2ACACD0670CD.jpeg (128.39 KiB) Viewed 9311 times
-
- F938EDB5-DAC4-40D1-ADAE-259FBDD3E338.jpeg (112.21 KiB) Viewed 9311 times
Tim
1972 Interceptor III
1972 Interceptor III
Re: "Setting about an Interceptor" - G Series repairs.
A lot of sealing up to be done now which will keep me occupied for a while,got a couple of modifications planned so will stick a couple of pics up when they are done.
Next major jobs will be getting the blue bits that are left on the car down to metal,prime and then contemplate dressing her in a,as Grant says,”lead’y” style.
Next major jobs will be getting the blue bits that are left on the car down to metal,prime and then contemplate dressing her in a,as Grant says,”lead’y” style.
- Attachments
-
- 2ECA60F6-D1E7-4CF2-AA4B-84B86249DDF8.jpeg (168.8 KiB) Viewed 9253 times
-
- 120A405B-E9A0-4B5E-A993-84B54448ED57.jpeg (152.98 KiB) Viewed 9253 times
-
- 4ECF13C2-D454-41D0-BDD0-67A810A49B55.jpeg (142.93 KiB) Viewed 9253 times
Tim
1972 Interceptor III
1972 Interceptor III
-
- Posts: 729
- Joined: Wed Apr 30, 2014 7:28 pm
- Location: United States
Re: "Setting about an Interceptor" - G Series repairs.
From the perspective of an older 75 years old any time sheet metal is replaced especially when welded and the car is jacked up the jack stands should be placed under the suspension as if the car is on its tires. Placing the car on its frame can put the car body on a twist and put the newly welded panels under strain or result in mis alignment. This is for the amateur attempting their own new work. For others this may explain to some others possibly why your efforts for perfection went astray. In a number of the photos the welding of new panels some structural and some also cosmetic the jack stands we’re supporting the welding operation by the frame rails. At the factory places the car in a jig to keep all in alignment. The replacement of the bad sheetmetal is important however the end result is also. This statement is for information only. RacerJoe
Re: "Setting about an Interceptor" - G Series repairs.
Refurbed the steering column and replaced the old u/j’s with Aston parts (surprisingly no too expensive).
Smaller than the stock items and sealed so no greasing to worry about,I reckon a little more pleasing to look at?
Smaller than the stock items and sealed so no greasing to worry about,I reckon a little more pleasing to look at?
- Attachments
-
- E3999F30-B2A7-4535-BBE5-E8057695381A.jpeg (229.77 KiB) Viewed 6315 times
-
- A17B3F72-ECF3-42A4-87E1-B4639899F09C.jpeg (246.76 KiB) Viewed 6315 times
Tim
1972 Interceptor III
1972 Interceptor III
Re: "Setting about an Interceptor" - G Series repairs.
They're nice Tim.. very neat.. I wish I had known about them.. when I did mine I also removed that rubbishy old plastic bearing holder at the end of the Steering column there at the bulkhead,.. right by all the heat of the manifold, it has loose ball bearings in there that fell all over the floor once I undone it years ago.. I then replaced it with a small needle roller race bearing set up, had to machine up a small housing for it and tack it on to the end of the column.. much nicer job.. have you done anything yourself with that part of the column or is it all Dandy as is TimboLeeny?
Manual Int&Rag-Top
"Monkey Man"sig Registrar
"Monkey Man"sig Registrar
Re: "Setting about an Interceptor" - G Series repairs.
It’s in a semi-dandy condition Mr Grantchester!
Insulated around the column entry point but brittle old plastic by the manifold is quite rightly a concern.
Will be attempting to clear as much heat from under the bonnet but will now be thinking about a little sleeve of some sort.
Thanks for raising it.
Insulated around the column entry point but brittle old plastic by the manifold is quite rightly a concern.
Will be attempting to clear as much heat from under the bonnet but will now be thinking about a little sleeve of some sort.
Thanks for raising it.
- Attachments
-
- 2C0EB72F-45F0-4372-A471-DB339381140B.jpeg (170.53 KiB) Viewed 6252 times
Tim
1972 Interceptor III
1972 Interceptor III
Re: "Setting about an Interceptor" - G Series repairs.
I know the usual Jensen suppliers used to do a replacement bottom bush/bearing, from memory it was a one-piece thing, but, it was always too tight and needed to be reamer-ed out bigger to be a better fit around the swiveling part of the steering column, it was a dangerous thing and I drove a car once that had one fitted that hadn't been reamer-ed out!!, wow when I went around the corner I nearly drove into a tree, it didn't return through your hands like steering normally does not sure if they are any better now... I didn't really like them.. but whilst clearing my barn the other evening I found one of the roller-race conversions I have done in the past, well it was a used replacement roller bearing.. if you want the number off that bearing I can put my hands on it easily if you want but you would need to machine up a holder for it if your interested anyway Tim.. there's a couple of options there.. let me know if you need more Ok Tim, or of course just do what you have in mind and wack a cover over it to stop the heat getting to it, the reason I got to all this years ago was that mine had up and down movement in the bottom bearing there and I didn't like it
Manual Int&Rag-Top
"Monkey Man"sig Registrar
"Monkey Man"sig Registrar
Re: "Setting about an Interceptor" - G Series repairs.
Thanks for your kind offer,at this moment I shall make do with the present set up but when everything is fine and dandy and it’s driving I know where to come.
Much Appreciated,cheers.
Much Appreciated,cheers.
Tim
1972 Interceptor III
1972 Interceptor III
Re: "Setting about an Interceptor" - G Series repairs.
This time a year ago I was anticipating showing some pics this month of my car getting some lead stuck to it.
The terrible pandemic we are enduring has curtailed that until a later time so a couple of alterations I thought may be of interest. The picture quality could be better but hopefully you get the gist of it.
The terrible pandemic we are enduring has curtailed that until a later time so a couple of alterations I thought may be of interest. The picture quality could be better but hopefully you get the gist of it.
Tim
1972 Interceptor III
1972 Interceptor III