Valve stem seals

Mopar Big Block Talk
Post Reply
esse1
Posts: 173
Joined: Sat Jun 11, 2011 6:33 pm
Location: New Zealand

Valve stem seals

Post by esse1 »

I have a gasket set (felpro FS 7891 PT-11) which includes 8 x valve stem seals - intake , 8 x valve stem seals -exhaust.

These seals match those on my 1972 440 heads. ( HC engine with dual springs per valve)

However also included in the set an extra 8 x valve stem seals . These are a similar shape to the inlet valve seals but much larger.

Are they for a different engine (kit for various engines from 361 -440ci) or perhaps for single springs ?
Interceptor III
128-8018
JOC Member 9685
User avatar
johnw
Posts: 2016
Joined: Wed Sep 15, 2010 7:38 pm
Contact:

Re: Valve stem seals

Post by johnw »

Any chance of some pictures of these seals please? I am in the market for a couple of Felpro gasket sets for 383s. I will be facing the same problem.
Have you seen our stolen Jensen FF 119/011 https://twitter.com/jensenffdotcom
esse1
Posts: 173
Joined: Sat Jun 11, 2011 6:33 pm
Location: New Zealand

Re: Valve stem seals

Post by esse1 »

left to right exhaust - inlet- -unknown
[imgImage][/img]
Interceptor III
128-8018
JOC Member 9685
DaveV8
Posts: 17
Joined: Thu Oct 04, 2018 1:51 pm
Location: UK

Re: Valve stem seals

Post by DaveV8 »

Centre seal fits intake, right seal exhaust, left seal not needed
Post Reply

Return to “V-8 Engine Tech”