Page 1 of 1
Interceptor logo artwork
Posted: Sat Jun 06, 2020 3:19 pm
by Eddie
Does anyone have some artwork for the Interceptor grill badge that they could share with me.
Am looking to make a large non slip mat that goes down the side of my car in my man cave.
Thanks in advance.
Eddie
Re: Interceptor logo artwork
Posted: Sat Jun 06, 2020 5:31 pm
by Grant
But Eddie..
this is your Job is it not?
Re: Interceptor logo artwork
Posted: Sat Jun 06, 2020 5:48 pm
by Eddie
Grant wrote:But Eddie..
this is your Job is it not?
Sort of, but don’t forget I’m just a simple joiner, it’s the people I work with who have the brains. The super duper art working lady is currently furloughed, I could ask her when she is back to recreate it, but thought I would see if someone else had already done it.
Re: Interceptor logo artwork
Posted: Sat Jun 06, 2020 5:51 pm
by Eddie
Eddie wrote:Grant wrote:But Eddie..
this is your Job is it not?
Sort of, but don’t forget I’m just a simple joiner, it’s the people I work with who have the brains. The super duper art working lady is currently furloughed, I could ask her when she is back to recreate it, but thought I would see if someone else had already done it.
Actually another question is, if nobody has the artwork, does anybody know what the font is??
Re: Interceptor logo artwork
Posted: Sat Jun 06, 2020 7:14 pm
by Grant
Eddie.. I know this doesn't help you 1 iota, but, I'm sure you are aware that I have been for a long time building my version of a JIA Car,
anyway I had these badges made from Glass Enamel.. I have for a good while struggled to find extra time to do too much to the car, so this maybe the only time anyone will see the badges
, so I have chosen you to admire them and tell me you can't stand the sight of them
.. and, if that is the case then when I see you next
>>>
>>>
- Interceptor badge RS Jpg.jpg (41.45 KiB) Viewed 4822 times
Re: Interceptor logo artwork
Posted: Sat Jun 06, 2020 7:37 pm
by Keith
An RS Grant?
You putting a Ford engine into it?
Re: Interceptor logo artwork
Posted: Sat Jun 06, 2020 7:45 pm
by Grant
Keith wrote:An RS Grant?
You putting a Ford engine into it?
Hello Keith My Ole Fruit
.. Yes..I was Instructed that if I used a 1300cc cross flow engine it would be a "Fuel Saver", that would of course save Buying one from Lewi
, but, then someone else suggested it wouldn't "Pull the Skin Off Of a Rice Pudding" but, foolishly I had already had the badges made
Re: Interceptor logo artwork
Posted: Sat Jun 06, 2020 8:27 pm
by Eddie
Grant wrote:Eddie.. I know this doesn't help you 1 iota, but, I'm sure you are aware that I have been for a long time building my version of a JIA Car,
anyway I had these badges made from Glass Enamel.. I have for a good while struggled to find extra time to do too much to the car, so this maybe the only time anyone will see the badges
, so I have chosen you to admire them and tell me you can't stand the sight of them
.. and, if that is the case then when I see you next
>>>
>>>
Interceptor badge RS Jpg.jpg
Being a true Essex boy, I am a 2 time owner of the mighty Escort RS turbo. So I think the InterceptorRS badge is a true master peice
Obviously none of the above helps with finding the correct artwork
Re: Interceptor logo artwork
Posted: Sat Jun 06, 2020 8:33 pm
by Grant
Cool StuFF Eddie, .. You would think in these days Ed that the chap that done them for me a good while ago now would have Font etc on a PC, but he was so Old School I know he couldn't help you EddieMan
Re: Interceptor logo artwork
Posted: Mon Jun 08, 2020 3:47 pm
by johnw
Eddie wrote:Grant wrote:Eddie.. I know this doesn't help you 1 iota, but, I'm sure you are aware that I have been for a long time building my version of a JIA Car,
anyway I had these badges made from Glass Enamel.. I have for a good while struggled to find extra time to do too much to the car, so this maybe the only time anyone will see the badges
, so I have chosen you to admire them and tell me you can't stand the sight of them
.. and, if that is the case then when I see you next
>>>
>>>
Interceptor badge RS Jpg.jpg
Being a true Essex boy, I am a 2 time owner of the mighty Escort RS turbo. So I think the InterceptorRS badge is a true master peice
Obviously none of the above helps with finding the correct artwork
Is that why your Interceptor is White Eddie? Grant I expected you would use a V6 and manual box from a Capri! A couple of Janspeed turbos on it and you would be laughing.
I am looking forward to see your creation Grant. I'm guessing a period Mopar V8, manual gearbox and multiple carbs of one description or another!
Re: Interceptor logo artwork
Posted: Sat Jun 20, 2020 11:26 am
by Eddie
Ended up drawing the artwork up on Autocad. For those that know graphic design it’s completely the wrong programming to use for something like this, but as I have said, I know nothing about graphic design.
It’s just a floor matt in the entrance to my air chamber. Just a bit of bling for the man cave really. It won’t wear out as it is rear printed on to a clear thick vinyl specifically for floor printing.
- 59C57D05-D458-4DD4-B210-2FD8A712F0BA.jpeg (103.97 KiB) Viewed 4493 times
Re: Interceptor logo artwork
Posted: Sat Jun 20, 2020 11:46 am
by ajc9415
Nice!
Re: Interceptor logo artwork
Posted: Sat Jun 20, 2020 3:17 pm
by Grant
Eddie wrote: but as I have said, I know nothing about graphic design
even though I own my own company that does Graphic Design
That looks great EddieMan
Re: Interceptor logo artwork
Posted: Sun Jun 21, 2020 7:08 am
by DPP
Very nice Eddie.