Hi All 2 questions:
1: what is the size (in mm) of the front and rear ref plate on a series 3 Interceptor?
2: where can I get replacement fixings for all the various cabin trim parts?
2 questions...
2 questions...
Mark Case
Belfast
136/8990 1973 Jensen Interceptor Series III
Follow my rebuild on Flickr at https://www.flickr.com/photos/96485131@N02/
Belfast
136/8990 1973 Jensen Interceptor Series III
Follow my rebuild on Flickr at https://www.flickr.com/photos/96485131@N02/
Re: 2 questions...
Sorry, meant reg plates...
Mark Case
Belfast
136/8990 1973 Jensen Interceptor Series III
Follow my rebuild on Flickr at https://www.flickr.com/photos/96485131@N02/
Belfast
136/8990 1973 Jensen Interceptor Series III
Follow my rebuild on Flickr at https://www.flickr.com/photos/96485131@N02/
- Chris_R
- JOC General Secretary
- Posts: 6577
- Joined: Sun Feb 10, 2008 9:19 am
- Location: South West London
Re: 2 questions...
Registration plate letter sizes were set by government regulation. After January 1st 1973 it was mandatory to fit reflective plates. Before that, from 1968 onwards, it was optional although many did have them fitted. The plates themselves followed an industry standard size of 20½" x 4⅜". The Interceptor would not have had anything different (would have been fitted by the original dealer anyway).
Chris
JOC Member 6116
--------------------------------------------------
JOC Member 6116
--------------------------------------------------