Replacement cabin roof headliner

[MarkC]

Hi All anyone any thoughts on where to get a new Jensen Interceptor headlining? I understand throughout production Jensen went from hide glued to reinforced card, to bonded to a fibreglass liner - it's just the liner I need - I'll get it trimmed locally. Answers on a postcard...

[Grant]

Mark as far as I know from my experience .. it has always been line stitched vinyl, the stitching through the Vinyl into 1/4 inch foam, I think there possibly was also a backing on the foam and that was then glued to the inside of the roof, but the backing I am not 100% sure about, maybe that may have been on the later cars or maybe not original, I saw it on someones car on here recently, but I think it may have not been original, check the thread by " Rolando"

[MarkC]

Thanks Grant yup I researched and discovered the same.

[Dino Fritz]

I knew I wrote up about this somewhere: https://www.joc.org.uk/forum/viewtopic. ... ng#p166444" onclick="window.open(this.href);return false;

Hope this helps,

Dino.

[Toby]

Just removed the original headlining from my MK3 and the vinyl is foam backed and stuck straight to the roof

[rolando38]

same state as mine

IMG_9680.JPG (143.86 KiB) Viewed 2870 times

but I'm struggling to sew the headlining properly, I'll have to have a second try

IMG_9823.JPG (77.57 KiB) Viewed 2870 times