The Jensen Owners' Club A technical and discussion forum for all Jensen enthusiasts It is currently Wed Apr 01, 2020 10:50 am

Parts Wanted

Interceptor interior light delay relay

by Gav » Fri Feb 21, 2020 11:49 pm

Hi all, does anyone have a useable interior light delay relay that mounts in the drivers door or can anyone give me a cross reference to an alternative that will do the job.
Many thanks in advance.
Gav
 
Posts: 31
Joined: Tue Jan 09, 2018 11:47 am
Location: Gosport

by JensenRemake » Sat Feb 22, 2020 8:16 am

Do you have a picture?
JensenRemake
 
Posts: 4
Joined: Sun Jan 19, 2020 10:05 am

by Gav » Sat Feb 22, 2020 11:01 am

I don’t have a picture of what it should look like as most of it was missing when I stripped out the door, but I do have a picture of what was left.
Attachments
46EEFE34-DEEE-48F5-B3D7-DF25E4B5158A.jpeg
46EEFE34-DEEE-48F5-B3D7-DF25E4B5158A.jpeg (131.1 KiB) Viewed 706 times
Gav
 
Posts: 31
Joined: Tue Jan 09, 2018 11:47 am
Location: Gosport

by Grant » Sat Feb 22, 2020 1:37 pm

If you're not fussed about using the original Lucas unit Gav.. then I would use a newer type electronic one as these old type Lucas ones are a Bi-Metalic strip set-up and are a bit slow to react, I find you want the lights to come on as you open the door and not 10 seconds later like they do, unless mine that I repaired is slower than normal, it's something I wanted to do was to put an electronic one in, but I never got around to it and sometimes I like the old type things that were how they were if you know what I mean :wink: .. I am sure all the usual suppliers have these old type ones in stock do they not?
Manual Int & Rag-TopImage
"Monkey Man"sig RegistrarImage
Image
User avatar
Grant
 
Posts: 3589
Joined: Tue Nov 30, 2010 1:11 pm
Location: surrey

by NigelK » Sat Feb 22, 2020 1:41 pm

I think the Interceptor ones are the same as in the GT - Chrysler part number 2889565 or Standard part number RY300. It will burn out if you leave the door open too long. This has happened several times when my GT was in the paint shop :|
Nigel Kieser
Bradford on Avon, Wiltshire
GT 30071 NUY 903P
User avatar
NigelK
 
Posts: 509
Joined: Tue Apr 15, 2014 12:19 pm

by Julian » Sun Feb 23, 2020 7:50 am

Replacements readily available in/from the USA.
M635csi Dinan 3.8, CLS 55AMG, Interceptor Convertible ... and a Stag
User avatar
Julian
 
Posts: 503
Joined: Sun Dec 24, 2006 1:39 am
Location: Milford Auckland New Zealand

by Gav » Sun Feb 23, 2020 8:10 pm

Thanks guys, all comments taken on board and have decided to use a Durite 10 second off delay unit as is the same money as the RY300 from the states but without the shipping/duty. It’s hidden behind the door panel so won’t be seen anyway. Cheers all.
Gav
 
Posts: 31
Joined: Tue Jan 09, 2018 11:47 am
Location: Gosport


Return to Parts Wanted