The Jensen Owners' Club A technical and discussion forum for all Jensen enthusiasts It is currently Fri Aug 14, 2020 12:06 am

Parts For Sale

CV8 / MK 1 Interceptor Kingpin front suspension parts

Forum automatically deletes unanswered posts after 45 days

by Mark1Stu » Fri Jul 03, 2020 3:29 pm

Many years ago I bought a MK1 Interceptor front crossmember complete with front suspension. I only bought it as I wanted the PAS brackets from it. I stumbled across the remnants of it the other day. Currently I have found:

1 x hub assembly including disc. This includes the kingpin.
2 x drop links for the anti roll bar
2 x coil springs
1 x lever arm shock absorber.

I can't find the other hub - which may have been thrown out some years ago.

Not sure of value, so make me an offer - rather than ask me for a price.

Ideally, needs collecting from Bristol unless you want to organise your own courier.

Parts have been stored dry for years, but are used. Drop links appear OK but probably scrap. Springs look good, lever arm shocker has had the top bolt cut off (I do have new bolts for this, so will try and find one for it) Disc has surface rust but isn't ridged - but again you may wish to simply buy new. Kingpin swivels smoothly and with no play...albeit in my hands!, but I haven't taken it fully apart.

I recall I have boxes of new bolts for the early MK1 suspension - including 4 inch long bolts to lower the spring pan.

I'll add some pictures when I can.

Posts: 1637
Joined: Sat Jan 14, 2006 1:30 pm

by Mark1Stu » Sun Jul 05, 2020 12:48 pm

Here are some pictures.
IMG_3691.JPG (178.92 KiB) Viewed 142 times
IMG_3689.JPG (187.31 KiB) Viewed 142 times
IMG_3686.JPG (154.27 KiB) Viewed 142 times
IMG_3685.JPG (153.06 KiB) Viewed 142 times
IMG_3684.JPG (188.36 KiB) Viewed 142 times
IMG_3683.JPG (177.68 KiB) Viewed 142 times
IMG_3681.JPG (214.22 KiB) Viewed 142 times
Posts: 1637
Joined: Sat Jan 14, 2006 1:30 pm

Return to Parts For Sale