The Jensen Owners' Club A technical and discussion forum for all Jensen enthusiasts It is currently Wed Dec 19, 2018 3:47 am

Parts For Sale

Workshop Clearance C-V8 383

Forum automatically deletes unanswered posts after 45 days

by Ian Northeast » Tue Nov 20, 2018 7:43 pm

Hi Guys,
I'm clearing some parts out to raise more funds for my next trip. I have images of all the following parts if anyone is interested let me know.
All the parts came from either a MK2 C-V8 or a 383 engine.
brake pedal
coil
crank damaged but regrindable
exhaust spacer
external oil filter pipes
flex plate
flex plate
front springs original
fuel tank
fuse box cover
gearbox oil cooler aftermarket part to do away with cooler inside the original radiator
handbrake cable
heater valve no idea of quality of this
hi flow water pump
kb pistons very low mileage oversize
master cylinder reservoir
new cam 440 source
new points
oil pump drive
old cams one of these is a comp cams hi perf unit (very good midrange)
original ex manifold not great but servicable
original fans
original intake manifold
original water pump
original wiper motor not sure if it still works
original heads fitted with valves and springs that have done very little work
pedal box
radio I never got it to work but then again never tried
rear bump stops
rear bumper mounts
remote oil filter plate
rockers
roller followers very little use, easy power!
ropey balancer nothing fundamentally wrong but looks rough
spare wheel carrier
std cam followers
swirl pot1 vital for fuel injection particularly if you like to play!
swirl pot2 as above but better
tacho no idea if it works (it came with the car when I bought it)
torque converter
torque converter
valves, springs and collets all low mileage
Most of the engine parts are the result of my search for more power. They have done very little work and have been replaced by bigger and better items.

The stuff left over from this advert will end up on E-bay but I'd much rather sell it to a Jensen owner.

Some of these parts are heavy, I can arrange postage but I'll get quotes first.

Ian
Time flies like an arrow, but fruit flies like a banana.
User avatar
Ian Northeast
 
Posts: 464
Joined: Fri Feb 03, 2006 1:06 pm
Location: Horley, Surrey

by interjen » Wed Nov 21, 2018 6:52 am

Hello Ian, I guessing from your forum name roughly where you're based but can you clarify please?
Regards Simon
Image
2340/1842 Int Convertible
2710/1965 Int Coupe
1640/30077 Jensen GT
1640/30105 Jensen GT
115/3215 Int MK1
FON2D CV8111
Rolls Royce Silver Cloud 1, 11 and 111.
Mk2 Jaguar
DB7 Vantage Volante
User avatar
interjen
 
Posts: 590
Joined: Thu Nov 17, 2005 4:05 pm
Location: Them there Wolds!

by Grant » Wed Nov 21, 2018 7:50 am

interjen wrote:Hello Ian, I guessing from your forum name roughly where you're based but can you clarify please?
Regards Simon

Ian is from Horley in Surrey Simon, it is clarified in his Avatar :wink:
Manual Int & Rag-TopImage
"Monkey Man"sig RegistrarImage
Image
User avatar
Grant
 
Posts: 2753
Joined: Tue Nov 30, 2010 1:11 pm
Location: surrey

by Grant » Wed Nov 21, 2018 8:53 am

Hi IanImage
Are the piston 1 size over standard maybe 30thou please?
Also.. do you know what compression ratio they gave you please?
If it is easier to discuss on the phone please give me a call 07831655722.. I am only up the road in Redhill :P :wink:
Many thanks Ian and with my kind regards... GrantImage
Manual Int & Rag-TopImage
"Monkey Man"sig RegistrarImage
Image
User avatar
Grant
 
Posts: 2753
Joined: Tue Nov 30, 2010 1:11 pm
Location: surrey

by Ian Northeast » Wed Nov 21, 2018 11:44 am

Hi Simon,

As Grant says I am in Horley (very near Gatwick) not that close to them there wolds!

Hi Grant,

I'll measure the pistons and send you a photo, they were fairly high compression if memory serves but I have been to sleep since then.
Might be easier if I bring them to work and you come and have a look if your down this way.

Ian
Time flies like an arrow, but fruit flies like a banana.
User avatar
Ian Northeast
 
Posts: 464
Joined: Fri Feb 03, 2006 1:06 pm
Location: Horley, Surrey

by Grant » Wed Nov 21, 2018 12:57 pm

Ian Northeast wrote:Hi Grant,
I'll measure the pistons and send you a photo, they were fairly high compression if memory serves but I have been to sleep since then.
Might be easier if I bring them to work and you come and have a look if your down this way.
Ian

Hello Ian, many thanks for your reply.. Yes sure, I guess that's best if you take them to work with you and I'll wizz down, rather than measure them maybe they have a part number on them and I could work it out from there, I don't want you to go to a load of work measuring and sending pics etc.. if you let me know when they are at your shop I'll come and see you Ian :wink: .. many thanks sport :P
Manual Int & Rag-TopImage
"Monkey Man"sig RegistrarImage
Image
User avatar
Grant
 
Posts: 2753
Joined: Tue Nov 30, 2010 1:11 pm
Location: surrey

by Ian Northeast » Wed Nov 21, 2018 8:54 pm

radio.JPG
radio.JPG (36.4 KiB) Viewed 352 times
orignal heads.JPG
orignal heads.JPG (46.02 KiB) Viewed 352 times
master cylinder reservoir.JPG
master cylinder reservoir.JPG (35.31 KiB) Viewed 352 times

Some requested images.

Ian
Time flies like an arrow, but fruit flies like a banana.
User avatar
Ian Northeast
 
Posts: 464
Joined: Fri Feb 03, 2006 1:06 pm
Location: Horley, Surrey

by simon wa » Thu Dec 06, 2018 8:52 pm

Do you have the engraved escutcheon for the wiper for cv8 mk 2. Know is small item but I am missing it. Tks
simon wa
 
Posts: 6
Joined: Mon Nov 07, 2016 5:26 pm

by Anton001 » Fri Dec 07, 2018 3:16 pm

Hi Ian,

Sent you a pm.

Anton
Jensen Healey Mk1 1123 / 11016
Jensen Interceptor MK2 123 / 3572
Jensen C-V8 MK3 112 / 2419
Jensen 541S / S1079


www.jensenholland.nl
User avatar
Anton001
 
Posts: 1310
Joined: Tue Sep 28, 2010 5:04 pm
Location: Netherlands

by jvcarrier » Tue Dec 18, 2018 10:16 am

Hi Ian

I need to get a swirl pot for the SP I am putting fuel injection on - what makes and referances if any are the ones you have?

Regards
John
User avatar
jvcarrier
 
Posts: 377
Joined: Sat Feb 07, 2009 1:20 pm
Location: The Shires


Return to Parts For Sale

cron