Jensen interceptor MK3 Breaking for spares
-
- Posts: 7
- Joined: Thu Sep 15, 2011 6:38 pm
- Location: Wolverhampton, England
Jensen interceptor MK3 Breaking for spares
Hello my fellow Jensen owners, I have recently joined the JOC on behalf of my brother and I as proud owners of a Jensen Interceptor Coupe 1976.
She has covered approx 96k and had a full restoration in the late eighties when owned by our Dad... well he's owned her since 1976! Even so after a full restore (original Nevis Blue) paint job, the interior may need a possible re-colouring, but, overall she goes well! Hence read the following...
Anyway back to the subject we also have a Jensen Interceptor MK3 which we intend to break. The car has only covered 36k but has been sat outside under a cover for around 25 years... The beige interior was stored in a sealed container and is in very good condition i.e no rips or scuffs. The engine and gearbox however is now claimed as a project to fit a 'SIX PACK' (any available )
We also have a good few other parts including full a/c system, badges, steering wheel etc. Just let me know what you need, especially if you have a spare SIX PACK lying around. Happy to post worldwide.
Ryan & Stuart.
She has covered approx 96k and had a full restoration in the late eighties when owned by our Dad... well he's owned her since 1976! Even so after a full restore (original Nevis Blue) paint job, the interior may need a possible re-colouring, but, overall she goes well! Hence read the following...
Anyway back to the subject we also have a Jensen Interceptor MK3 which we intend to break. The car has only covered 36k but has been sat outside under a cover for around 25 years... The beige interior was stored in a sealed container and is in very good condition i.e no rips or scuffs. The engine and gearbox however is now claimed as a project to fit a 'SIX PACK' (any available )
We also have a good few other parts including full a/c system, badges, steering wheel etc. Just let me know what you need, especially if you have a spare SIX PACK lying around. Happy to post worldwide.
Ryan & Stuart.
Hi,
I am looking for louvred bonnet and a good front bumper for my MKIII
And I think I know where a six pack is, but it is brand new unused with orange air filter etc. The guy who had it was willing to part with it about 12 months ago for about xxx£1600 but I would obviously have to find out if this is still the case.
Let me know if this is of interest and or if you have bits for me.
Cheers
I am looking for louvred bonnet and a good front bumper for my MKIII
And I think I know where a six pack is, but it is brand new unused with orange air filter etc. The guy who had it was willing to part with it about 12 months ago for about xxx£1600 but I would obviously have to find out if this is still the case.
Let me know if this is of interest and or if you have bits for me.
Cheers
Tony Morgan
Tango Int III 2240*9580
Jeep Unlimited
Aprilia RSV Factory, BMW K1200R & KTM 450 EXC
Chevy G20 (Thunderbird 2 )
Tango Int III 2240*9580
Jeep Unlimited
Aprilia RSV Factory, BMW K1200R & KTM 450 EXC
Chevy G20 (Thunderbird 2 )
-
- Posts: 5229
- Joined: Mon Oct 17, 2005 4:22 pm
- Location: Bristol, UK
New six packs and lots of other goodies are available from Jims Auto Parts in the US, see
http://www.jimsautoparts.com/mopar_performance_fuel.htm
I bought various bits and pieces from the them for my old SP.
http://www.jimsautoparts.com/mopar_performance_fuel.htm
I bought various bits and pieces from the them for my old SP.
Lear 8 Track and cassettes
Hi john please tell me if the radio etc is still for sale,
thanks paul
thanks paul
Interceptor chassis
Is the chassis any good on your car you are breaking? I'm after one with good floors etc but don't want the body. Thanks.
CV8 Mk11
8 track/cassette
do you have the original radio/eight track/cassette ?
'73 Interceptor 3 136 8330
'70 Mercedes 3.5 coupe
'70 Porsche 911t
'66 Maserati tipo 107 Quattroporte
'70 Mercedes 3.5 coupe
'70 Porsche 911t
'66 Maserati tipo 107 Quattroporte
- patrick hiron
- Posts: 351
- Joined: Fri Mar 19, 2010 8:08 pm
- Location: Montreal Canada
Steering column / horn push wiring
Hi
I want to reinstate my horm push in the centre of the wheel . Do you have the top section of the steering column ? I need the bare column section , including the internal wiring to the horn push I have the horn push steering .lock and flasher switch etc
Thanks
Patrick
I want to reinstate my horm push in the centre of the wheel . Do you have the top section of the steering column ? I need the bare column section , including the internal wiring to the horn push I have the horn push steering .lock and flasher switch etc
Thanks
Patrick
In hock to Jensen Interceptor MkII VIN 125 5289 named "Monty Python -something completely different "!!
JOC Membership no 9782
JOC Membership no 9782
-
- Posts: 2979
- Joined: Mon Dec 11, 2006 11:08 pm
- Location: CREWE
I think you are right, I did not recieve an acknowledgement, reply or any contact via the forum, private message or email.cannonball wrote:think this person has done a bunk,,,,,,,,,,,,,,,,,,,,,
A request, if any one is going to put messages like this on the forum please respond to the replies even more so when you are indicating that you are wanting others to reply to your posting
Steve
Interceptor III
Jensen Healey MK1
Jensen Healey MK2
Jensen Healey MK1
Jensen Healey MK2
-
- Posts: 3684
- Joined: Sun Aug 10, 2008 8:52 pm
- Location: Halesowen, West Mids
I have the mobile number of Ryan the vendor. I was after the front slam panel for my Mk I but it has been removed. This suggests that the vehicle is in the advanced stages of deconstruction.
If you would like the number PM me. He is a stone's throw away from me in Wolverhampton.
If you would like the number PM me. He is a stone's throw away from me in Wolverhampton.
Paul McElhinney - Mk I 115/3309 in Positano yellow, FF Mk II 127/289.
-
- Posts: 305
- Joined: Wed Mar 23, 2011 10:24 am
- Location: canterbury kent
i will see ryan on sunday when i collect the interior(sold on ebay) the engine and gearbox and the shell
ill tell him to reply to his messages
ill tell him to reply to his messages
2xmk2 123/3670
5 mk3 128/4381 , 2240/9628 , 136/8561 ,
1x 67 FF mk1 1x 70 FF mk2 1x 74 FF mk3
SEE MY COLLECTION OF OTHER MAKES
and a digger to dig bigger holes
5 mk3 128/4381 , 2240/9628 , 136/8561 ,
1x 67 FF mk1 1x 70 FF mk2 1x 74 FF mk3
SEE MY COLLECTION OF OTHER MAKES
and a digger to dig bigger holes
-
- Posts: 305
- Joined: Wed Mar 23, 2011 10:24 am
- Location: canterbury kent
shell
towed my trailer all the way to wolverhampton to collect a supposedly good shell to find one that was completely f###ed no front panels no n/s wing and every other panel either very bent or rusted away did not need trailer as i could have folded the shell up and put in the boot, looks like it picked a fight with a tank and lost, engine in bits and parts spread out everywhere over the floor but interior is ok so not a complete waste of a journey, as i got a few other bits while there but very expensive parts
their coupe is nice (but not outstanding) if you like coupes
their coupe is nice (but not outstanding) if you like coupes
2xmk2 123/3670
5 mk3 128/4381 , 2240/9628 , 136/8561 ,
1x 67 FF mk1 1x 70 FF mk2 1x 74 FF mk3
SEE MY COLLECTION OF OTHER MAKES
and a digger to dig bigger holes
5 mk3 128/4381 , 2240/9628 , 136/8561 ,
1x 67 FF mk1 1x 70 FF mk2 1x 74 FF mk3
SEE MY COLLECTION OF OTHER MAKES
and a digger to dig bigger holes