The Jensen Owners' Club

When rebuilding my motor, my brother recommended changing the standard oil pressure warning light sensor - his experience with Chrysler motors at the time suggested that the warning light could come on with oil pressure as low as 4psi . We had a local instrument place supply and calibrate an adjusta...

Howdy, SP's use a rear axle ratio of 2.88 (which I have been told are worth big $$'s to those who are building Cobras to exact replicas), while the remaining Mk III's use 3.07 ratios in the rear end. As for the transmission, the SP's had an additional clutch pack (I think it was 5), which also needs...

Nice to hear Bettina Evans being mentioned in this thread - I had some lovely discussions with her on the phone in the early 90's when I was ordering parts from the Jensen Car company!

Dino

Aaargh.... I just logged on and noticed this a handful of hours after the ebay listing ended - damn!

Good luck to whoever bought it (lucky bugger)!


Dino

Oh, were the Bay City Rollers in the closing ceremony as well

Dino

Hi Stephanie, I guess the question is how reallly keen are you to tackle the restoration (and what support network and $$'s that you have). I helped my brother and several of his friends in restoring their cars before I decided to tackle an Interceptor Mk III, and I have to agree with comments made ...

My father is a baker and has three ovens at his shop, with only two in use. The third sits immediately below the second, and while it doesn't work, it will reach around 80 degrees C when the top oven is on. Being around five foot square, it's perfect to cure heat proof paint on exhaust headers.........

Hi, I don't know much about the UK scene, but several years ago I conducted an investigation into the Accident Towing Roster Scheme in operation here in South Australia. I wonder if there may be a similar, larger issue worthy of investigation in the UK surrounding motor vehicle accidents and the leg...