The Jensen Owners' Club

yes the dash is unfortunate .....and as an American , Im no longer surprised at the things my fellow Americans do to cars .........

the thermoquad will return highest MPG (unless you go EFI) IF you keep your foot out of it .

2 OWNERS , ALL DOCUMENTATION , CLEAR FL TITLE , LOW MILES , NEEDS PAINT (MUCH OF THE HARD WORK COMPLETED) , NEEDS ASSEMBLY (REBUILT ENGINE AND TRANSMISSION). WILL NEED EXHAUST , REBUILD STEERING RACK , BRAKES , AND VARIOUS MAINTENANCE , VERY NICE SERVICEABLE LEATHER , PERFECT DASH. SILVER WITH BURGU...

these are on ebay , there is a Factory tool to install and size it , but not 100% required .....

Bosch platinum is available again in USA if anyone is interested , best non fouling and for CD igs is Champ j12y ....Bosch platinum was an old favorite too

obtain an assistant ....disable the ignition coil completely .....get a 4 foot piece of wood and 6 point socket 1/2 or 3/4 inch drive ....snap it on a long breaker bar ... touching the floor with the bars handle on YOUR right side ,put the socket on the bolt, hold the assembly on the bolt with the w...

paint it blue , then black then if it chips /flakes ..it will look 100% original

Right Stuff products , or Fine Lines in USA , specify carb and pump , never had trouble getting these , but not uncommon to get the wrong items ...

do you know anyone with a cylinder shorting tach/dwell or scope ? will find a missfire in seconds,,,,,,,,or maybe the crank damper has spun round ?

if a shop does Diesels , they can install hardened exhaust seats on a 440/383 .....maybe some new aluminum heads perhaps ?

if the cam bearings are flaking away ,,,,,,,sort of a waste of time

there are very few chain and gear setups left on the market that wont stretch something chronic . Check out the Hughes engines site , or learn the hard way...

Daytona Carb .....Daytona FL USA has multi fuel compatible cups . Make sure you have a brass checkvalve as well . The original leather cups were best of course if there is a source for these .....In the USofA , it is common to have to "fix" "remanufactured" carbs of all types . E...

a carb is NOT fuel injection , dont expect to see one behave as such